Grinders

WARNER & SWASEY (NORTON) 14” x 72” Cyl. Universal grinder Serial No. L2320 – Model LU4 – New 1976 Swing Over Ways: 14” Distance Between Centers: 72” Wheel Head Swivel: 180 Degrees Work Head Swivel: 360 Degrees Work Head Spindle Speeds: (Inf. Variable) Motors: 3 HP Spindle; 1 HP Hydr. Motor; ¾ HP DC Work Head Motor; Coolant Motor and Internal Grinding Spindle Motor Complete With: Live and Dead Head Work Head With Hardinge Collet Chuck; Internal Grinding Spindle; Coolant and Tailstock

Mohawk Model 330 Automatic Drill Sharpening Machine Serial No. 330003 - New 1987 Grinding Wheel Size: 8" x 2" x 4-1/2" Wheel Spindle Speeds: 3,000 ROM Right Hand Spiral Drill Capacity: 5/16" to 3", 2, 3, or 4 Flutes Helix Angle: From 0 Deg. to 40 Deg. Point Angle: From 90 Deg. to 140 Deg. Lip Clearance Angles: 3 Deg. to 25 Deg. Overall Length of Drill: up to 39" Long Motors: 3 HP Wheel Head Motor, 12 HP Hyd. Motor; .1 HP Coolant Motor Complete With: 20 Gallon Capacity Coolant System F.O.B. Indianapolis, IN

Brown & Sharpe 8" x 24" Micromaster Hydraulic Surface Grinder Serial No. 523-824-891 - New 1974 Maximum Work Width and Length: 8" x 24" Maximum Work Height With 14" Diameter Wheel: 18" Working Surface of Table: 8" x 24" Longitudinal Table Feeds: 10 to 125 FPM Maximum Long. Table Travel: 28" Spindle Motor: 5 HP and Complete Electrics Complete With: 8" x 24" Electric Chuck and Coolant System This machine has power feed in both long. and cross directions, with motorized vertical elevation Weight: 4,700 lbs. Overall Dimensions: 77" x 82" x 80" Tall F.O.B. Indianapolis, IN